Opens in a new tab
Crew cutting a concrete foundation wall for a new egress window

Foundation Concrete Cutting in Denver

Clean, straight openings through poured concrete, block and brick foundations, cut by the crews who do it every day for egress windows and walkouts.

The hardest part of the job

The cut makes or breaks an egress install

Every new basement window or door starts with a hole in the foundation, and that hole has to be the right size, square and structurally sound. A clean saw cut means the header, window and trim go in right the first time.

Our crews have the wall saws and the experience to cut thick, reinforced walls, block and brick, and even make a perfectly straight cut on a slanted wall. The opening is engineered before we cut and supported with an approved header after.

  • New egress window openings
  • Enlarging existing basement windows
  • Door openings for walkout basements
Worker saw-cutting a concrete basement wall

Foundations we cut

Every wall type on the Front Range

Poured

Reinforced poured-concrete walls, including thick walls with rebar

Block

Cinder and concrete block foundations

Brick

Brick and older masonry foundations

Slabs

Thick concrete slabs

Angles

Straight cuts on slanted or uneven walls

Engineered

Every structural opening has an engineering detail

Denver Egress Window work trucks at a job site

Not a big, messy job

In and out with the opening ready

Cutting a foundation sounds like a major project, but with the right equipment it doesn't have to be expensive or messy. We protect the work area, remove the cut section and haul the debris away, so the opening is ready for its window or door.

Questions

Concrete cutting questions

Yes, when it’s engineered. Every structural opening we cut has a third-party engineering detail, an approved header and an inspection, so the wall stays as strong as it needs to be.

Yes. We cut poured concrete, cinder block, brick and older masonry foundations. Each one needs a different approach, which our crews are used to.

A wall saw makes a controlled cut instead of breaking the concrete out, which protects the surrounding wall. The engineered header then carries the load above the opening.

Most of our cutting is part of a complete egress window or walkout basement job, where we handle everything from engineering to trim. Call us to talk through your project.

Reviews

Clean cuts, happy customers

“The worker came out to replace a rusted window well in a difficult location. He carefully cut away some bordering concrete and the overall work quality was excellent. He also cleaned up the jobsite when all was finished. Highly recommend”

Randy Sewald

“This company was one of only two companies who were able to cut and install four egress windows in 22.5 inch thick concrete. They did an amazing job and were very responsive to any questions or customer needs. All of the work was permitted and properly executed. I would definitely recommend them.”

Michael Zywicki

“We used Denver Egress for removing two small basement windows and cutting in and installing a new Egress window in the concrete walls. Options available were good as were the prices. We were scheduled in a reasonable time frame and installation was timely and punctual. All debris was removed and the site was left clean. We would recommend and use again without hesitation.”

Mark Mauro

Need a clean opening cut in concrete?

Tell us about the wall: poured, block or stone. We'll plan the cut, engineer the opening and send a free estimate.

(720) 626-4221

Serving Denver and the Front Range. Showroom and virtual appointments available.

When would you like to start?
Get text updates about your project (optional)

Message frequency varies. Message and data rates may apply. Reply STOP to opt out or HELP for help at any time. See our Privacy Policy and Terms & Conditions. Not required to request an estimate.